IOLM 8-PNIO-L Images

U-Boot Bootloader

v1.30

U-Boot is a high-level bootloader that has networking and console command line capabilities. Among other things, it implements a TFTP server and Pepperl+Fuchs Comtrol, Inc. Corporation's new discovery protocol. This verifies that a Linux kernel image exists in NAND, then copies it to RAM and starts the IO-Link Master The U-Boot version is displayed after the image name.

You can review the image History file for the latest updates and enhancements.

FPGA

v1.01

The FPGA partition/image contains configuration data used by programmable hardware within the IOLM 8-PNIO-L.

This FPGA image is specific for the IOLM 8-EIP-L and the IOLM 8-PNIO-L.

You can review the image History file for the latest updates and enhancements.

System Primary/Backup uImage

v1.36

The uImage contains the Linux kernel and the RAM-resident root file system. It does not contain industrial protocol support or application-specific features.

There is a Primary and Backup version loaded on the IO-Link Master. The IO-Link Master automatically reloads the Backup uImage if the file system corrupted. The uImage version is displayed after the Primary/Backup uImage.

You can review the image History file for the latest updates and enhancements.

Application Base

v1.5.28

The Application Base image comprises a flash-resident file system containing application and PROFINET IO protocol support.

You can review the image History file for the latest updates and enhancements.