You can use the IO-Link Master PROFINET IO and Modbus/TCP User Guide for detailed installation and configuration procedures. Also, the IO-Link Master web interface help system provides detailed information.

The following provides an installation and configuration overview for the IOLM 4-PNIO.

Install the IOLM 4-PNIO hardware.
1. If required by your site environment, set the Rotary Switch
  
  Note
  Technical Support advises that you use PortVision DX or the web interface to program the IP address to streamline installation.
2. Connect to the network
3. Connect the power
4. If desired, mount the IO-Link Master
5. Connect the IO-Link devices
Verify that the latest images are installed on the IO-Link Master. If necessary, download the latest images and upload the images onto the IO-Link Master.

Configure PROFINET IO using Step 7.

Note
You can use the Chapter titled, Configuring the IO-Link Master with Step 7 or TIA Portal in the IO-Link Master PROFINET IO and Modbus/TCP User Guide for detailed configuration procedures.

	02/06/20	Home \| Comtrol Website
	Copyright © 2020 Pepperl+Fuchs Comtrol, Inc.