|  | IOLM DR-8-PNIO-T Installation OverviewYou can also refer to the IO-Link Master PROFINET IO and Modbus/TCP User Guide
for detailed installation and configuration procedures. ![[Note]](images/note.gif) | | Note |
|---|
The IOLM DR-8-PNIO-T must be installed in a suitable fire, electrical, mechanical area. |
|
The following provides an installation and
configuration overview for the IOLM DR-8-PNIO-T. Install the IOLM DR-8-PNIO-T hardware.
Connect to the network. Connect and apply the power. Connect the IO-Link devices. If desired, connect digital input or output devices to the digital IO ports. If desired, mount the IO-Link Master.
Verify that the latest images are installed on the IO-Link Master.
If necessary, download the latest images and upload the images onto the IO-Link Master. Configure PROFINET IO using Step 7.
| |
