|
Windows XP SP3 through Windows 10
(32/64-bit)
| 
v5.01
| You can use PortVision DX to identify, configure,
update, and manage the IO-Link Master and all other Pepperl+Fuchs Comtrol, Inc. Ethernet-attached devices.
You can use PortVision DX to perform the following tasks:
Configure the IP address Upload the latest images or application sub-assemblies Access the IO-Link Master web configuration interface Save/load configuration files Reboot the IO-Link Master Reset to factory default values Access a Telnet/SSH session Toggle the IO-Link Master LEDs in the event you need to locate a specific IO-Link Master
Procedures to configure the IP address and upload software is available in the navigational bar at the
left for your model.
You can use the help system for information about
using PortVision DX.
|
