|  | IOLM DR-8-PNIO Connect to the NetworkThe IOLM DR-8-PNIO provides two Fast Ethernet (10/100BASE-TX) RJ45 connections.
You can use this procedure to connect the IOLM DR-8-PNIO to the network. Securely connect one end of a standard RJ45 Ethernet cable to either Ethernet port.
![[Note]](images/note.gif) | | Note |
|---|
You will need to know which port you connected when you configure the
IO-Link Master with Step 7 or TIA Portal. |
|
Connect the other end to the network. Optionally, you can use the other Ethernet port to daisy-chain to another Ethernet device.
| |
