IOLM DR-8-EIP-P Images

[Note]
Note

FPGA images are specific to the hardware and software model.

You must load the appropriate software for your model. The software on this page is for the IOLM DR-8-EIP-P (DIN rail model with pluggable/removable push-in connectors.

If the wrong FPGA is loaded on your IO-Link Master, you may need to send the IO-Link Master into Pepperl+Fuchs Comtrol, Inc. for re-initialization.

You can check the image versions displayed on the IOLM DR-8-EIP-P Advanced | Software web page against the versions available using the table below.

IOLM DR-8-EIP-P ImageReleased VersionBETADescription

U-Boot Bootloader

v1.30

Retrieve File

 

U-Boot is a high-level bootloader that has networking and console command line capabilities. Among other things, it implements a TFTP server and Pepperl+Fuchs Comtrol, Inc. Corporation's new discovery protocol. This verifies that a Linux kernel image exists in NAND, then copies it to RAM and starts the IO-Link Master The U-Boot version is displayed after the image name.

You can review the image History file for the latest updates and enhancements.

FPGA

FPGA CAUTION

v1.01

Retrieve File

 

The FPGA partition/image contains configuration data used by programmable hardware within the IOLM DR-8-EIP-P.

FPGA images are specific to the hardware and software model, the IOLM DR-8-EIP-P.

You can review the image History file for the latest updates and enhancements.

System Primary/Backup uImage

v1.36

Retrieve File

 

The uImage contains the Linux kernel and the RAM-resident root file system. It does not contain industrial protocol support or application-specific features.

There is a Primary and Backup version loaded on the IO-Link Master. The IO-Link Master automatically reloads the Backup uImage if the file system corrupted. The uImage version is displayed after the Primary/Backup uImage.

You can review the image History file for the latest updates and enhancements.

Application Base

v1.5.28

Retrieve File

 

The Application Base image comprises a flash-resident file system containing application and EtherNet/IP and Modbus/TCP protocol support.

You can review the image History file for the latest updates and enhancements.

[Note]
Note

There are no application sub-assemblies to download at this time. This means that the Application Base image contains the latest applications for your IO-Link Master.


nice color