Comtrol Logo

 Downloads
 DeviceMaster
 IO-Link Block
 IO-Link Master
 EtherNet/IP
 Installation 4-EIP
 Installation 8-EIP
 Installation 8-EIP-L
 Installation DR-8-EIP
 Installation DR-8-EIP-P
 Connect the Network
 Connect the Power
+Connect Devices
 Set IP Address
 Configure Ports
 Installation DR-8-EIP-T
 PortVision DX
 Software
 Common Procedures
 Documentation
 Troubleshooting
 PROFINET IO
 RocketLinx
 RocketPort
 RocketPort USB Serial Hub II
 Troubleshooting
 Obsolete/Legacy Files
 Support Contribs Directory
 Comtrol Forum
 Lodging Link Online Support
 Download Issues
 Report Site Issues

IOLM DR-8-EIP-P Connect Devices

You can use the IO-Link Master Library for EtherNet/IP and Modbus/TCP or the following information to connection IO-Link devices to the IOLM DR-8-EIP-P.

IO-Link Port Power and Current

This table provides information that you may need regarding the IO-Link connectors.

Current and Power Value

Maximum IO-Link Supply

200mA

Maximum C/Q Current:

High: 200mA

Low: 200mA

Peak C/Q Current:

High: 500mA

Low: 500mA

C/Q and DI Input

Maximum: Power Input +0.5VDC

Minimum: -0.5VDC

SDCI (IO-Link) Transmission Rates:

COM1: 4.8Kbps

COM2: 38.4Kbps

COM3: 230.4Kbps

Connect to IO-Link Ports

The IOLM DR-8-EIP-P provides eight IO-Link ports with push-in removable connectors. IO-Link Port

You can connect IO-Link and/or digital IO devices to an IOLM DR-8-EIP-P IO-Link port.

SignalPinDescription

L+

1

Power supply output(+)

L-

2

Power supply output(-)

DI

3

Digital input

C/Q

4

Communication signal, which supports SDCI (IO-Link) or SIO (standard input/output)
nice color
02/06/20Home | Comtrol Website 
Copyright © 2020 Pepperl+Fuchs Comtrol, Inc.