| | DeviceMaster PROFINET IO Installation Overview | Note |
---|
Please note that the DeviceMaster PNIO is another member of the DeviceMaster Industrial Gateway, which includes the
DeviceMaster UP family. The links from this page link you to the DeviceMaster UP download pages. |
|
If you are not familiar with installing the DeviceMaster Industrial Gateway, you can use the following installation overview or the appropriate
PROFINET IO User Guide. | Note |
---|
The PROFINET IO firmware only supports DeviceMaster Industrial Gateway 1-port through 4-port models. |
|
-
Install the hardware. -
Install PortVision DX so that you can easily
configure the network information.
| Note |
---|
If you have previously installed
PortVision DX you may want to verify that you are running the latest version. PortVision DX is continuously updated with new
features and added support for the latest hardware model releases. |
|
If necessary, upload
PROFINET IO or check the firmware version on the DeviceMaster Industrial Gateway against
the ftp site to see if you should download the latest version. If the DeviceMaster Industrial Gateway contains PROFINET IO, you should
verify that it is the latest version
before configuring the serial characteristics.
If a new firmware version is available, upload
the firmware to the DeviceMaster Industrial Gateway. -
Configure the DeviceMaster Industrial Gateway port characteristics for your environment using the embedded web pages on the DeviceMaster Industrial Gateway.
There are two ways that you can access the embedded web page:
Open PortVision DX, right-click on the appropriate DeviceMaster Industrial Gateway unit and select
Webpage. Open your web browser and enter the IP address of the DeviceMaster Industrial Gateway.
-
Connect the serial devices to the DeviceMaster Industrial Gateway using the DeviceMaster UP | DeviceMaster PNIO User Guide. Configure the DeviceMaster Industrial Gateway using the TIA Portal.
Install the GSD file
The GSDML file can be downloaded directly from the DeviceMaster PNIO home page.
Add the DeviceMaster Industrial Gateway IP address assignment Device name assignment Establish a PROFINET IO connection Configure IO modules
For detailed steps and procedures, refer to the DeviceMaster UP | DeviceMaster PNIO User Guide
| |