The following utilities and applications are available for the DeviceMaster EIP-MOD platform.
The DeviceMaster EIP-MOD platform requires a PortVision DX minimum version of 4.10.
You can use this utility to upload firmware on a Linux system.
Optionally, you can use RedBoot to upload firmware.
Windows XP SP3 through Windows 10
You can use PortVision DX to identify, configure,
update, and manage the DeviceMaster Industrial Gateway.
PortVision DX is the easiest way to program the IP address and upload firmware.
You can use the help system for information about
using PortVision DX.