Windows XP SP3 through Windows 10
You can use PortVision DX to identify, configure,
update, and manage the DeviceMaster LT.
You can use the help system for information about
using PortVision DX.
In addition, PortVision DX contains Test Terminal and Port Monitor.
Test Terminal can be used to troubleshoot communications on a
port-by-port basis. You can use the procedure in the
Port Monitor checks for errors, modem control, and status signals
and provides you with raw byte input and output counts.
You can use the
Port Monitor (PMon2) and Test Terminal (WCom2) User Guide,
which provides procedures for using both Test Terminal and Port Monitor to test ports and communications.