DeviceMaster Industrial Gateway

The DeviceMaster Industrial Gateway includes the following products:

Note Product Name Change Notification for DeviceMaster UP 2-port DIN rail models.

Select the appropriate protocol for your environment (left) or the links below to locate software or installation and configuration procedures for your DeviceMaster Industrial Gateway. The links from this page link you to the DeviceMaster UP download pages.

You may need upload the appropriate firmware for your protocol depending on the DeviceMaster UP model you purchased. The DeviceMaster UP may, or may not have the appropriate protocol firmware loaded.

Models that have a protocol loaded on the DeviceMaster UP are identified in PortVision DX and the DeviceMaster Industrial Gateway hardware is labeled accordingly.

DeviceMaster EIP models by default, ship with EtherNet/IP loaded. You should always verify that the latest firmware version resides on your DeviceMaster EIP using PortVision DX.

DeviceMaster MOD models by default, ship with Modbus Router loaded. You should always verify that the latest firmware version resides on your DeviceMaster MOD using PortVision DX.

DeviceMaster PNIO models by default, ship with PROFINET IO loaded. You should always verify that the latest firmware version resides on your DeviceMaster PNIO using PortVision DX.