DeviceMaster LT NS-Link Device Drivers

Linux

2.6.33 through 5.2.x Kernels

(32/64-bit)

v7.34

Technical Support recommends that you update to the latest version of SocketServer before installing an NS-Link device driver.

You can refer to the readme file bundled with the driver for installation procedures. Optionally, you can use the Installation Overview .

You can download LCOM, which can be used for testing serial ports on a Linux system.

v7.38

IPv4 Only Device Driver

Windows XP SP3 through Windows Server 2019

(32/64-bit)

v12.06

Note This is the last release of the IPv4 driver. If your browser cannot download this file, you will need to use the IPv4/IPv6 driver.

Technical Support recommends that you update to the latest version of SocketServer before installing an NS-Link device driver.

If you are unsure about the driver version, use the Device Manager to check a driver version.

You can use the Windows driver installation procedures or optionally, open the DeviceMaster NS-Link for Windows User Guide, which provides detailed installation procedures.

IPv4/IPv6 Device Driver

Windows 7 through Windows Server 2019

(32/64-bit)

v3.02

If this is a new installation, Pepperl+Fuchs Comtrol, Inc. advises installing this device driver.

Note If this is an existing installation running the IPv4 driver, you must remove the IPv4 driver. We advise saving the driver configuration files. You can download a two page document that will guide through this process.

Technical Support recommends that you update to the latest version of SocketServer before installing an NS-Link device driver.

If you are unsure about the driver version, use the Device Manager to check a driver version.

You can use the Windows driver installation procedures or optionally, open the DeviceMaster NS-Link for Windows User Guide, which provides detailed installation procedures.