DeviceMaster 500 NS-Link Device Drivers

Linux

2.6.33 through 4.4.4 Kernels

(32/64-bit)

7.18

Technical Support recommends that you update to the latest version of SocketServer before installing an NS-Link device driver.

You can refer to the readme file bundled with the driver for installation procedures. Optionally, you can use the Installation Overview .

You can download LCOM, which can be used for testing serial ports on a Linux system.

Linux

2.6.18 through 2.6.32 kernels

(32/64-bit)

v6.03

Technical support typically recommends using v6.03 for kernels 2.6.18 through 2.6.32.

Refer to the readme file bundled with the driver for installation procedures.

You can also download LCOM, which can be used for testing serial ports on a Linux system.

Linux

2.6.0 through 2.6.17 kernels

(32/64-bit)

Technical support typically recommends using v4.06 for kernels 2.6.0 through 2.6.17, unless you require a 64-bit driver; then use v7.02.

Refer to the readme file bundled with the driver for installation procedures. You can also download LCOM, which can be used for testing serial ports on a Linux system.

Optionally, you can use the Installation Overview .

Linux

2.4.30 through 2.4.35 kernels

(32-bit)

Technical support typically recommends using v4.05 for kernels 2.4.30 through 2.4.35.

Refer to the readme file bundled with the driver for installation procedures. You can also download LCOM, which can be used for testing serial ports on a Linux system.

Optionally, you can use the Installation Overview .

Windows XP SP3 through Windows 2016

(32/64-bit)

11.08

Technical Support recommends that you update to the latest version of SocketServer before installing an NS-Link device driver.

If you are unsure about the driver version, use the Device Manager to check a driver version.

You can use the Windows driver installation procedures or optionally, open the DeviceMaster NS-Link for Windows User Guide, which provides detailed installation procedures.