|
Installation
| Rev E
| Use this document for installation and user information for the DeviceMaster Primo.
|
|
Using Raw and Pair Connection Methods
| Rev B
| This document provides information about using raw and pair connections with the DeviceMaster Primo.
|
|
Firmware
| v2.40
| You must install one of the Windows drivers to access the
DMupg.exe Utility, which is required to updated the firmware on the DeviceMaster Primo.
|
| Linux | V1.02
| Refer to the readme file bundled with the driver for installation procedures.
You can also download LCOM,
which can be used for testing serial ports on a Linux system.
|
|
Using minicom
| Rev C 
| This document discusses using minicom, a built-in serial
communication utility. You can use minicom for sending commands
to attached modems.
|
|
Windows 98
Windows Me
| V1.05 
| You can use the
DeviceMaster Primo Serial Port Server Device Driver
Installation guide for installation procedures.
|
|
Windows 2000
| V1.07
| You can use the
DeviceMaster Primo Serial Port Server Device Driver
Installation guide for installation procedures.
|
|
Windows NT
4.0
| V1.05
| You can use the
DeviceMaster Primo Serial Port Server Device Driver
Installation guide for installation procedures.
|
|
Windows XP
| V1.07
| You can use the
DeviceMaster Primo Serial Port Server Device Driver
Installation guide for installation procedures.
|
|
Test Terminal
Windows 98/Me
Windows NT
Windows 2000/XP
| V1.01
| This is a test terminal program that you can use to test the port.
|
![[Note]](images/note.gif)
