IOLM 4-EIP Mounting the IO-Link Master

Use the following procedure to mount the IO-Link Master. The IO-Link Master can be installed on a mounting panel or a machine.

  1. Verify that the mounting surface is level (flat) to prevent mechanical stress to the IO-Link Master.

  2. Attach the IO-Link Master to the surface with two 6mm screws and washers.

  3. Attach the grounding strap to chassis or earth ground.

  4. Torque down to 8Nm.

  5. Make sure that you connect the FE terminal at low impedance to function ground to meet EMC standards.


nice color