IO-Link Master EIP Series Overview
The following items are available for the IO-Link Master EIP Series.
To avoid possible damage, ensure that the power supply used with the IOLM 8-EIP is powered off before connecting power cables.
Installation Overview to install and configure your IO-Link Master.
4-EIP: IP67 4-port model with T-coded power connectors
8-EIP: IP67 8-port model with T-coded power connectors
8-EIP-L: IP67 8-port model with L-coded power connectors
DR-8-EIP: DIN rail 8-port model with 2 dedicated DIO ports
DR-8-EIP-P: DIN rail 8-port model with removable/pluggable push-in connectors
DR-8-EIP-T: DIN rail 8-port model with removeable/pluggable terminal connectors
The Installation Overviews reflects configuration and feature information about the latest
released Application Base image in Software Downloads.
Optionally, refer to the help system in the embedded web interface for feature and configuration procedures
for your specific Application Base.
SOFTWARE DOWNLOADS - Check for the
latest software versions. There are four images that run on the IO-Link Master, of which, the FPGA is unique to the hardware type.
PortVision DX, Pepperl+Fuchs Comtrol, Inc. application that runs on Windows
for easy configuration and management of the IO-Link Master and other devices.
Supporting Documentation - IO-Link Master Library for EtherNet/IP and Modbus/TCP, and the PortVision DX User Guide.
Program examples - Provides example PLC programs
(L5K and ACD) for RSLogix 5000 based PLCs, such as the ControlLogix.
Electronic Data Sheet (EDS) files -
Easily add the IO-Link Master and its associated EDS files to RSLinx.
Add On Instructions (AOI) - Use the AOI files to simplify your programming.
Troubleshooting - Provides troubleshooting information about
the IO-Link Master.