You can use the IO-Link Master Library for EtherNet/IP and Modbus/TCP or the following information to connection IO-Link devices to the IO-Link Master.

The IOLM 4-EIP provides four IO-Link ports with M12 connectors (5-pin female/A coded). IO-Link Port Connector

Note
Make sure that you tighten the cables properly to maintain IP67 capabilities.

This table provides signal information for the IO-Link connectors.

Pin	Signal	Description
1	L+	Power supply (+)
2	DI	Digital input
3	L-	Power supply (-)
4	C/Q	Communication signal, which supports SDCI (IO-Link) or SIO (standard input/output)
5	N/A	Not Connected

This table provides information that you may need regarding the IO-Link connectors.

Current and Power	Value
Maximum C/Q Current:	200mA
Maximum L+/L- Current Output	500mA
C/Q and DI Input Maximum (L+) Minimum (L-)	Power Input +0.5VDC -0.5VDC
SDCI (IO-Link) Transmission Rates:	COM1: 4.8Kbps COM2: 38.4Kbps COM3: 230.4Kbps

	02/06/20	Home \| Comtrol Website
	Copyright © 2020 Pepperl+Fuchs Comtrol, Inc.