|  | RocketPort Jet Driver Installation: Windows Vista and Windows Server 2008Make sure that you have done the following: Unpackaged the driver files If necessary, set the DIP switches. Installed the RocketPort Jet in the PC.
Use the following procedure to install the device driver. If you have not done so, power on the PC.
Plug and play will detect a new hardware and start the New Hardware Wizard. Click Show Me Other Options when asked to install the disc. Click Browse My Computer for Driver Software (Advanced) and
browse to the location where you unpackaged the driver files. Click Next.
Windows will install the driver. Click Finish.
![[Note]](images/note.gif) | | Note |
|---|
The RocketPort Jet 2-port installs four ports by default. |
|
Go to the Device Manager.
Click Start, right-click Computer. Click Manage. Click Diagnostics and then double-click
Device Manager. Expand the Multi-port serial adapters entry, right-click the
RocketPort Jet you want to configure, and then click Properties.
Click Ports (COM & LPT). Click Enhanced Communications Port X (COMxx). Click Properties and then Data Rate. Check the Input Clock Frequency. The clock frequency should be 14.7456 MHz.
If it is not, select 14.7456 or
Autodetect Clock Frequency. Click OK.
| |
