IOLM DR-8-PNIO Installation Overview

You can also refer to the IO-Link Master PROFINET IO and Modbus/TCP User Guide for detailed installation and configuration procedures.

Note
The IOLM DR-8-PNIO must be installed in a suitable fire, electrical, mechanical area.

The following provides an installation and configuration overview for the IOLM DR-8-PNIO.

Install the IOLM DR-8-PNIO hardware.
1. Connect to the network.
2. Connect and apply the power.
3. Connect the IO-Link devices.
4. If desired, connect digital input or output devices to the digital IO ports.
5. If desired, mount the IO-Link Master.
Verify that the latest images are installed on the IO-Link Master. If necessary, download the latest images and upload the images onto the IO-Link Master.

Configure PROFINET IO using Step 7.

Note
You can use the Chapter titled, Configuring the IO-Link Master with Step 7 or TIA Portal in the IO-Link Master PROFINET IO and Modbus/TCP User Guide for detailed configuration procedures.

	02/06/20	Home \| Comtrol Website
	Copyright © 2020 Pepperl+Fuchs Comtrol, Inc.