IOLM DR-8-PNIO Connect Devices

You can use the IO-Link Master PROFINET IO and Modbus/TCP User Guide or the following information to connection IO-Link devices to the IOLM DR-8-PNIO.

IO-Link Port Power and Current

This table provides information that you may need regarding the IO-Link connectors.

Current and Power Value

Maximum IO-Link Supply

200mA

Maximum C/Q Current:

High: 200mA

Low: 200mA

Peak C/Q Current:

High: 500mA

Low: 500mA

C/Q and DI Input

Maximum: Power Input +0.5VDC

Minimum: -0.5VDC

SDCI (IO-Link) Transmission Rates:

COM1: 4.8Kbps

COM2: 38.4Kbps

COM3: 230.4Kbps

Connect to IO-Link Ports

The IOLM DR-8-PNIO provides four or eight IO-Link ports with screw terminal connectors (depending on the model). IO-Link Port

You can connect IO-Link and/or digital IO devices to an IOLM DR-8-PNIO IO-Link port. If necessary, review port placement.

SignalDescription

L+

Power supply output(+)

L-

Power supply output(-)

DI

Digital input

C/Q

Communication signal, which supports SDCI (IO-Link) or SIO (standard input/output)

Connect to Digital I/O Ports

IOLM DR-8-PNIO models provide four digital IO ports. DIO Port

If necessary, review port placement.

SignalDescription

L+

Power supply (+)

L-

Power supply (-)

DI

Digital input

DIO

Digital I/O


nice color