IOLM DR-8-PNIO-T Connect to the Network

The IOLM DR-8-PNIO-T provides two Fast Ethernet (10/100BASE-TX) RJ45 connections. You can use this procedure to connect the IOLM DR-8-PNIO-T to the network.

Ethernet Connectors
  1. Securely connect one end of a standard RJ45 Ethernet cable to either Ethernet port.

    [Note]
    Note

    You will need to know which port you connected when you configure the IO-Link Master with Step 7 or TIA Portal.

  2. Connect the other end to the network.

  3. Optionally, you can use the other Ethernet port to daisy-chain to another Ethernet device.


nice color