IOLM DR-8-PNIO-P Connect to the Network
The IOLM DR-8-PNIO-P provides two Fast Ethernet (10/100BASE-TX) RJ45 connections.
You can use this procedure to connect the IOLM DR-8-PNIO-P to the network.
Securely connect one end of a standard RJ45 Ethernet cable to either Ethernet port.
You will need to know which port you connected when you configure the
IO-Link Master with Step 7 or TIA Portal.
Connect the other end to the network.
Optionally, you can use the other Ethernet port to daisy-chain to another Ethernet device.