Comtrol Logo

 Downloads
 DeviceMaster
 IO-Link Block
 IO-Link Master
 EtherNet/IP
 Installation 4-EIP
 Installation 8-EIP
 Installation 8-EIP-L
 Installation DR-8-EIP
 Installation DR-8-EIP-P
 Installation DR-8-EIP-T
 PortVision DX
 Software
 Common Procedures
 Load IODD Files
 Configure IO-Link Devices
 Data Storage
 Device Validation
+Data Validation
 Documentation
 Troubleshooting
 PROFINET IO
 RocketLinx
 RocketPort
 RocketPort USB Serial Hub II
 Troubleshooting
 Obsolete/Legacy Files
 Support Contribs Directory
 Comtrol Forum
 Lodging Link Online Support
 Download Issues
 Report Site Issues

IO-Link Master EIP Series Data Validation

Data validation is supported by many IO-Link devices. You can use this procedure to configure data validation.

  1. Open the IO-Link Master embedded web interface.

  2. Click Configuration | IO-Link Settings.

  3. Click the EDIT button on the port you want to configure for data validation.

  4. Select Loose or Strict to enable Data Validation.

    • Loose - the slave device's PDI/PDO lengths must be less than or equal to the user-configured values.

    • Strict - the slave device's PDO/PDO lengths must be the same as the user-configured values.

  5. Click the GET ATTACHED button or manually enter the PDI and PDO length.

  6. Click the SAVE button.
nice color
02/06/20Home | Comtrol Website 
Copyright © 2020 Pepperl+Fuchs Comtrol, Inc.