RocketPort INFINITY Installation Overview

Installation follows these basic steps:

Unpack the RocketPort INFINITY device driver assembly.
Install the RocketPort INFINITY adapter and attach the interface.

Note
Do not connect RS-422/485 devices until the appropriate port interface type has been configured in the device driver. The RocketPort INFINITY default port setting is RS-232.

You can open the RocketPort INFINITY User Guide for hardware installation procedures.

Note
Windows: Click Cancel if a Found New Hardware message appears.
Install the device driver for your operating system. You may need to configure the device driver, if your serial devices are not using the device driver default values.
- Windows XP through Windows 10 installations, see the RocketPort INFINITY Device Driver Installation Guide for Windows
- Windows 2000, download the legacy RocketPort INFINITY Device Driver Installation Guide for Windows 2000.
- Other device driver assemblies contain a readme file with device driver installation and configuration information.
Connect the serial devices to the RocketPort INFINITY ports.

For installation problems, there are applications available to test the device driver or you can install the Pepperl+Fuchs Comtrol, Inc. Utility and use Test Terminal to test the ports.

	02/06/20	Home \| Comtrol Website
	Copyright © 2020 Pepperl+Fuchs Comtrol, Inc.