RocketPort Serial Hub Si 2-port

Some Pepperl+Fuchs Comtrol, Inc. software (device drivers, utilities, and tools) are compressed and you must extract the files before installation. For assistance, see Extracting Pepperl+Fuchs Comtrol, Inc. Driver Packages.

Operating SystemFileDescription


Hardware Installation

Rev A Download

This guide contains installation and specification information for the RocketPort Serial Hub Si 2-port.


Cabling User Guide

Rev B Download

This guide contains additional cabling information if you are building cables.


2.4.30 through 2.4.35 kernels

v4.05 Download

Technical support typically recommends using v4.05 for kernels 2.4.30 through 2.4.35.

Refer to the readme file bundled with the driver for installation procedures. You can also download LCOM, which can be used for testing serial ports on a Linux system.


Using minicom

Rev C Download

This document discusses using minicom, a built-in serial communication utility. You can use minicom for sending commands to attached modems.

Windows 2000

Windows Server 2003

Windows XP

V4.01 Download

You can use the NS-Link Use Guide Rev D for installation procedures.

Windows NT


V7.25 Download

You can use the NS-Link Use Guide Rev D for installation procedures.

Comtrol Utility

Windows 2000

Windows Server

Windows 2000

V3.00 Install from CD

The Pepperl+Fuchs Comtrol, Inc. Utility contains Test Terminal and Port Monitor.


Products labeled Obsolete means that both the product and download files are obsolete and are AS IS (in mature status and are no longer updated). Limited Technical Support available.

nice color