RocketLinx ES8510 Software

SoftwareOperating SystemDescriptionFile

PortVision DX

Windows XP SP3 through Windows 10

Use PortVision DX to manage the ES8510 on your network and program the IP address information. In addition, use PortVision DX to upgrade the firmware and bootloader.

You can use the installation overview or the RocketLinx ES8510/ES8510-XT User Guide for installation and configuration procedures.

v5.01

Open

Configuration Web Page Firmware

All

Make sure you download the latest version of PortVision DX before using it to upload new firmware. Some users have experienced upload issues with PortVision DX versions previous to v4.06.

You can download the latest version of the ES8510 firmware, which supports all web browsers.

If you are upgrading from firmware version v2.6, you must use TFTP to load the web interface firmware using the Console port or web interface. Refer to the User Guide for information about using TFTP and how to use the web page to update firmware with TFTP.

You can review the firmware History file for the latest updates and enhancements.

v3.1a

Retrieve from the ftp site

Bootloader

All

You can download the latest version of the bootloader.

v1.6.2.12

Retrieve from the ftp site

SNMP MIB File

All

You can download the MIB file for the ES8510.

3.1a

Retrieve from the ftp site

[Note]
Note

PortVision DX has been released to replace NetVision for device management. NetVision has migrated to Legacy status, meaning that any bugs or issues will be resolved by replacing NetVision with PortVision DX.


nice color